Trying to make it work Following this guide. Helping Jeff debug it. Witmotion Sensor Installation

From 65in to 32in, static to moving… Context I recently moved houses and had to disassemble and reassemble my rig. I wrote about this process here. My original triples (65in TVs) simply did not fit in the sim room of the new house, and thus I needed a new plan. I…

Moved houses, so changes abound… Context I have been into simracing (a hobby, not a competitive driver) for a couple of years. I had gotten my simrig setup, and tuned…and then we had to go and move houses. What’s more, the room where the simrig goes in the new house is…

First Impressions as well — TL;DR The Varjo Aero is excellent in clarity and other features, but it is not without problems. This write-up details the hoops I needed to go through to get it to work, somewhat acceptably, in my setup, which includes a triple-monitor. Expectations I had had a horror story with Pimax (see here)…

Short project, with nice results — Summary Some electronics, a bit of soldering, and 3D printing get you detailed feedback on when your brakes are locking (on the brake pedal) or when your wheels are spinning (on the throttle pedal) Context Adding stuff to the rig is half the fun of sim-racing. As such, one is always looking…

Multiple months of debugging, finally seem to be paying off — I have been into simracing for about two years, give or take. During all that time, I have been plagued by mysterious issues where devices would disconnect and reconnect at will, or would simply misbehave in other ways. I have been debugging this issue forever, and I think I’ve gotten…

If you are into sim-racing, and have decided to get a belt tensioner system, chances are that you will want to add a “roller” onto your system, so that the belt pulls you “backwards” and not “down”, which is what happens if you use the belt holes in the seat…

Patience required… — Context I have been having trouble with my brand-new Pimax 8KX. I have tried multiple times to solve issues. Pimax support is nice in that they connect to your computer and try to debug issues. The process they follow, however, seems a bit unstructured, and it does not seem to actually…

First ride, and impressions — with an update after 600 miles — Update 02/28/2022 — — — — — — — — — It has been several months since I got the Azub SIX. It is rainy season (if you can call it that) here, so I have not been out riding as much. Still, I’ve logged 661 miles on the bike, so I thought I’d update my “first impressions” article below. …